5HP ac drive inverter
1. 5HP ac drive inverter.
It is a series of 5HP ac drive inverter with three kinds of control methods—V/F control, vector control without PG, torque control. T It is applicable in many situations which needs accurate speed control, fast torque response speed and high start torque The safe operation depends on proper delivery, Automatic voltage regulation, Frequency skip function
2. Basic Parameters of 5HP ac drive inverter.
3. Main features and application of the 5HP ac drive inverter.
Output frequency is range from 0Hz to 2000Hz；
High performance V/F control algorithm with several kinds of V/F curves；
Several phases speed operation controlled by build-in PLC ；
Multi phase speed control function ,Several kinds of frequency setup；
Build-in PID control function；
Input switch channel:8 channel program switch input, 35 kinds of certain designed function；
Space vector pulse width modulation(SVPWM)；
RS485 communication interface, which support MODBUS protocol with ASCII and RTU forms
4. Main parameters of 5HP ac drive inverter.
5. Details of 5HP ac drive inverter
6. Corner of Factory
7. After Service Introduction
1. The customer may call the Anyhz after-sales service hotline or the regional service hotline to seek service if there is a failure in the use of the product or if the user has problems in debugging the product parameters.
2. The customer should provide the following information: name of the contact person, contact information, machine type, number, failure phenomenon.
3. During the doffing of large, medium and small yarns, there is a clear difference in the change in tension. For the requirements of spinning frame equipment control, in the near future, the application of the spinning control system for vector control inverters can help the spinning frame to complete better roughing processes.
9. Industrial news of 5HP ac drive inverter
Corrosion-resistant gas: This situation is more common in the chemical industry. In this case, the inverter cabinet can be placed in the control room.
The signal line and the power line must be routed separately: When using the analog signal to remotely control the inverter, in order to reduce the analog quantity from the interference from the inverter and other equipment, please control the signal line of the inverter and the strong electric circuit ( The main loop and the sequence loop are routed separately. The distance should be more than 30cm. Even in the control cabinet, the same wiring specification must be maintained. The maximum length of the control loop between this signal and the inverter must not exceed 50m.
10. More details
Applied in various kinds of high speed mechanical assembling situation.
Widely deployed in high speed grinding machine, high speed milling machine, engraving machine.
11. 5HP ac drive inverter Wirings diagram