Main shaft of CNC frequency inverter
We are professional manufacturer of Main shaft of CNC frequency inverter. The frequency converter adapts to the voltage fluctuation of the power grid very well and has a wide voltage operating range. When power grid fluctuates between -45% and +15%, the system can operate normally. Our product has exported to 45 countries and has CE certificates .
1. Main shaft of CNC frequency inverter.
Basic function of a CNC machine is to provide automatic and precise motion control to its elements such work table, tool spindle etc. Drives are used to provide such kinds of controlled motion to the elements of a CNC machine tool. A drive system consists of drive motors and ball lead-screws. The control unit sends the amplified control signals to actuate drive motors which in turn rotate the ball lead-screws to position the machine table or cause rotation of the spindle.
2. Basic Parameters of Main shaft of CNC frequency inverter.
3. Main features and application of the Main shaft of CNC frequency inverter.
4. Main parameters of Main shaft of CNC frequency inverter.
5. Details of Main shaft of CNC frequency inverter
6. Corner of Factory
8. Main shaft of CNC frequency inverter application:
Many simple CNC machines are equipped with an inverter controlling the spindle completely independent of the control system, coupled only to a signal activating the spindle. This causes a situation in which the CNC control system does not know what is going on with the electro-spindle - whether it is overloaded or overheated and what the current value of the rotational speed is. Additionally, the operator must often set the rotational speed roughly only using the knob on the desktop. The inverter should constantly communicate with the control system to keep providing it with, e.g., the current load of the spindle, which can be used for the dynamic control of the feed rate or for the detection of faults, such as machine stop, before the tool is damaged.
9. Main shaft of CNC frequency inverter Wirings diagram